A compact and highly efficient screw pump to spray the wet ready-mixed cement slurry, mortar, etc., equipped with small air compressor,
Output: 30 Litre/min
Work pressure: 3MPa (30bar)
RISEN RX30 is a screw pump. It is a continuously working mixing machine, equipped with small air compressor, water pump, flow meter, to spray the dry ready-mixed cement mortar, etc. This machine permits the easy and comfortable transport due to its small and handy dimensions and low weight.
Requirement on the materials:
To have a perfect mortar spraying, the diameter of the sand shall not be too big. The max. sand size is 2mm. And, the cement/sand ratio shall be bigger than ≥ 1:3.
Application:
To spray or pump all pumpable dry ready-mixed mortars or materials, such as cement mortar, lime plaster, gypsum plaster, masonry mortar, insulation plaster, self-leveling floor screed, etc.
● The integrated machine with mixing pipe, self-suck water pump, mini compressor and rotor/stator pump;
● Continuously mixing and pumping;
● Small and handy size and low weight, quickly and easily transport even in the most confined spaces;
● The rotor/stator pump ensures the materials is pumped and sprayed out continuously and evenly;
● The machine always works with efficiency and silence;
● The machine consists of portable units, permitting easy to operate and take maintenance and easy to use in any circumstance.
Output |
30L/min |
Working Pressure |
3MPa (435psi) |
Total Power |
8.5kW (11.6hp) |
Voltage of E-motor |
380V, 50Hz, 3-phase |
Rev. of Rotor |
380rpm |
Rated output of compressor |
250L/min |
Rated output of water pump |
700L/hour |
Max. Conveying Dist. |
20m |
Hopper Capacity |
120L |
Loading Height |
1000mm |
Conveying Hose ID |
25mm or 32mm |
Air Hose ID |
13mm |
Overall Dimension |
1240*680*1550mm |
Weight |
280kgs |
● Equipped with excellent quality small-size air compressor;
● IP55 100% new electrical motor;
● Electrical control box manufactured by thicker plate and standard Schneider electrical elements;
● Standard seal parts to ensure the excellent seal quality;
● Wear resistance rotor and stator can be replaced in the flash as required;
● Painted after sandblasting for a pretty appearance.
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.
Address: Science&Technology Building ,No.43 TongBai, Zhengzhou, Henan Province, China
Tel: +86-371-67770703
Fax: +86-371-67770031
E-Mail:sales@risencrete.sina.net
CopyRight © RISEN MACHINERY CO., LTD. -All Right Reserverd PRIVACY POLICY Powered by MetInfo 公司营业执照信息公示